Introduction
The configuration of the metering pump in a single beam nonwoven fabric making machine will be covered in this article. In order to size and fill the cloth with the appropriate weight, a metering pump is utilized. Additionally, it is utilized to regulate the feeding mechanism's pace. The fabric is moved through the non woven fabric machine by a number of rollers that make up the feeding mechanism.
Source: https://i.pinimg.com
Configuring Metering Pump in a Single Beam Nonwoven fabric Making Machine
Pay particular attention to the following advice while installing a metering pump in a single beam non woven fabric making machine:
Ensure that the machine frame is securely fastened to the pump. In order for the pump to move smoothly and consistently over the fabric coating line, it should be located in the middle of the machine's breadth, if not exactly there.
Check to determine if the meter level is lined up with one of the grooves in the cross member to level the fabric coating line. Adjust until both are level as necessary. This will guarantee uniform coating thickness and aid in preventing potential run-off issues.
Install the discharge pipe of your metering pump so that it points downward and away from people and other items that might be drawn to the spray jets the pump produces. Don't forget to cover your discharge pipe correctly when not in use. Bystanders will be shielded from potential harm and destruction as a result.
Source: https://i.pinimg.com
Conclusion
The configuration of a metering pump in a single beam non woven making machine will be covered in this article. You can assure precise dye dose and prevent any machine malfunctions by taking the right actions. Before starting, make sure to carefully read all directions to avoid receiving a damaged product or becoming hurt.