We are currently in a CMM Inspection Companies area of the factory where we are working.
The first region that we look at is the region in which the majority of the rough cmm inspection services that we do takes place. You are going to see our five-axis echo mill, which has a capacity of 10 meters. These are the large-scale products that we offer. In this region, yes, one can find the necessary raw materials. When we receive the original castings, we will begin the processing procedure in this side area once more. Once we have completed the rough machining or semi machining on the castings, we will move them to the next wall of our five-axis boring machine to complete the machining process. Some customers have also sent us their castings. A CNC boring machine is what we use for our four-axis boring machine. On these components, we have once again processed a large number of welding parts, this time using a wider variety of welding parts. These components serve multiple purposes as well.
A turntable can be cmm services here. In this sense, we are our large machine, which is a power mill manufactured by Mechof and features our largest five-axis mill.
Because this side contains the entire body, it is fortunate that it is able to deal with virtually anything. You should know that in order to make use of all of its capabilities, we have put in place three or four distinct other tools or parts, which are currently undergoing processing in stages. The fact that the machine can continue to function normally even while something is being checked or programmed represents a significant improvement in the effectiveness of our operations. As I was explaining just now, because our finishing machine is so big, the only place we have available space next door is in the hallway. In this section of the building, we have five-axis milling machines that are smaller than those that occupied this space in the past, when it housed our larger machines; therefore, our platoons are located here.
In addition, our processing division houses a diverse selection of five-axis milling machines. But in addition to that, when we first opened our doors at the hard steel next door, we were nothing more than a machine shop. There, among the many stainless steel and nvar components, we have remained the standard for cutting operations. This is where you can view our compact rolling mill with five axes. After that, this section of the machine shrinks, but it's also where we do a lot of the detailed work that allows us to process small stainless steel or aluminum parts on these smaller five-axis milling machines again. You're probably familiar with the undercut hole or flange.
We will walk back. All of our manufacturing and welding is completed here. There are five axes of water jets available to us here. This water table has five axes and has 20 feet and 10 feet on either side. There are five different axes here. We can make an inclined plane by tilting our heads, which is something that a lot of people already know how to do. Because manufacturing and welding require a significant number of bevel joints, we complete all of these works on the water jet. This allows us to cut the raw materials into the appropriate sizes and prepare them for manufacturing outside of the gate. This structure is a low egg grid, and it is very similar to the plane tool industry that serves the aerospace sector. Autoclaves are used at the beginning of the process because they are required for anything that requires the use of composite molds for carbon fiber lamination. Since we also use the same process on cars, this means that basically anything that requires the use of composite molds for carbon fiber lamination requires the use of autoclaves. As you can see in the background of this picture, cmm inspection services we make use of a number of laser trackers.
These are all connected to our catia workstation, and so even during the manufacturing process, our employees are actually looking at the cad model and assembling it to the model itself by laser. After that, we are actually placing the laser positioning disc, which will allow it to be placed above the machine workshop once the manufacturing process is finished. They are fully aware of the precise location of the weldments, the additional inventory, as well as all of the additional materials that are required for the processing. This is the 750-ton brake press that I mentioned earlier; therefore, we can use it once more to straighten and shape the panel tools, in addition to any type of weldment that we are studying, in order to achieve a more advantageous position. This is the location where we finished the certification process for the aerospace tooling, and we are now ready for shipment. Factory No. 4,We begin in either the fat department or the mechanical processing department, but before we get to the finishing department, one thing must be manufactured or processed elsewhere. We are going to move on through our CMM materials. They are put together to form fully functional components.
Simply put, this is a brand new piece of equipment for both our CMM room and our quality control department. We put it to use in the collection of data. As a result, we utilize a great deal of materials that are either small or thin. It will cause the material or the component to bend.
